Se rendre au contenu

Help Center -> Loggers -> Pro Logger -> How the Pro Logger Works

How the Pro Logger Works

Learn the basic way the EXACT Pro Logger works to reliably transmit your data

Features that set us apart



There is no ON/OFF switch.

The Pro Logger is always ON.


By default, Loggers wake up at every quarter minute of the hour.

This interval can be changed to 1, 5, or 10 minutes.

Loggers save up to 21 days of temperature measurements.

Automatically re-

transmit up to 7 days worth of saved data

Older data can be 

re-claimed by an EXACT employee

How Data is Logged & Transmitted


The Logger takes temperature measurements from all connected probes + ambient.


It will always measure and transmit an ambient reading even if no probes are connected.



Then, the Logger transmits the measured temperature and/or humidity readings to the nearest Relay.

If the Logger can’t connect to a Relay, it will store the measured readings in its memory.


On the next transmission window, it will transmit the new readings alongside any saved ones in the memory.